This job requires a tube of lube, a vice or clamps, jack stands, a floor jack, a torque wrench, a flat head screwdriver, open end wrenches, something to catch gas, and a receptacle for brake fluid.

In order to reach the suspension bushings, you must drop the entire suspension assembly. Jack up the vehicle, placing it securely on adequate jack stands. Place a floor jack in the middle of the beam under the suspension and jack it up to help support the weight. Once the vehicle is suspended, you can safely disconnect the shock absorbers near the bottom. Then, remove any related bolts so that the suspension can drop. Lower the suspension assembly and the jack slowly.

The suspension bushing assembly will be on each side of the suspension ensemble. Fit an open wrench on the inside and a socket on the outside of the center bolt. Loosen this bolt completely and pull it out. The suspension assembly will now be free of the total ensemble.
Read the rest of this entry »